FFP3/N100 mask

> 99,99% filtration of particulate aerosols

Bidirectional protection

Graphene FREE

Buy
FFP3 Star Care

Maximum filtration

The FFP3 Star Care mask ensures a filtration of more than 99,99% against particulate aerosols, one of the highest results in the market.

5 protective layers

The layered structure (5 hydrofobic layers) is designed so that Non-woven layers protect the inner layers from the humidity of the environment and other external agents as well as the mist generated by the user.

FFP2 Star Care

Non-woven

50 g/m2

Non-woven

25 g/m2

Melt-blown

≃ 30 g/m2

Melt-blown

≃ 30 g/m2

Non-woven

25 g/m2

Smart filtration by electret

FFP3 masks do not work exactly like a strainer but rather like a spider web, as the particles get stuck in the fibers that make up the mask.

We can group the particles in three sizes:

Larger than 0.3 𝝻m

Large particles like droplets of saliva, some bacteria, etc.

Between 0.3 𝝻m and 0.1 𝝻m

We call them aerosols where viruses travel attached.

Smaller than 0.1 𝝻m

Viruses and other nanoparticles.

Larger than 0.3 𝝻m

 

Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.

Star Care FFP2 despiece

Larger than 0.3 𝝻m

Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.

 

Smaller than 0.1 𝝻m

Those smaller than 0.1 μm are so small that when in contact with air they bounce moving in a random zig-zag pattern called Brownian. This movement makes it very likely that the particle collides with a fiber and sticks.

 

Star Care FFP2 despiece

Between 0.3 𝝻m and 0.1 𝝻m

 

Particles of about 0.3 μm (aerosols) are the most difficult to filter as they flow with the air, allowing the layers of the mask to be avoided. To avoid this, 2 of the layers of Star Care’s FFP3 masks are electrified, converting the fibers into electrets (the electrical equivalent of a magnet), being able to capture 10 times more particles than normal fibers. 

 

Star Care FFP2 despiece

High breathability

Star Care masks stand out for their high breathability. Its design means that the mask does not stick to the face, providing a greater volume of air and therefore better breathability.  

In addition, the selected materials offer a low resistance to breathability, allowing to achieve much better results than those required by European regulations.

Star Care FFP2 despiece

Ergonomic shape, perfect fit

The FFP3 Star Care mask is designed with every detail in mind. They have great resistance, more than 25 Newtons (2.5 times higher than other masks), and they are welded with double union to the body of the mask

Thanks to the ear saver, you can adjust the mask perfectly to the size of your head, reducing air leaks from the inside to the outside and vice versa.

The flat shape of its rubbers and its elasticity make its use extremely comfortable even after a long time.

Packaging

Each Star Care mask is individually packaged in a ziplock bag made up mostly of cellulosic material (kraft type). Once the mask has been used, it can be stored in the bag again which, with its holes, facilitates the hygiene and integrity of the product.

In addition, thanks to the time tracker and the name tag, you will always have control of the time you have used the mask.

Star Care FFP2 despiece
Star Care FFP2 despiece
Star Care FFP2 despiece

Ziplock

Ventilation for correct storage

Time tracker

Name tag

Anti-fake system

To guarantee that you are buying an original Star Care product, look for the Original Product sticker that includes a QR that allows access to the specific data of the Quality Control performed on the mask and that certifies the originality of the product. It also includes a holographic seal that ensures the inviolability of the box once it has left the production line until it reaches the end user.

Technical information

Product name: Filtering  half mask

Classification: FFP3 NR

Model: MSH

Size: 155 x 118 mm

Executive standard: EN 149:2001 + A1:2009

Composition: 66.7% Non-woven cloth and 33.3% melt-blown cloth

Conditions for storage: Indoor storage with less than 80% humidity, free from corrosive gases and well ventilated. Keep it away from heat

Allergy warningNon-woven textile

Expiration time: Two years if stored under the specified conditions

Anti-fog design and face perfect fit

High breathability

Doble welding that guarantees the resistance of the cords (> 25 Newtons)

With cord stoppers for size regulation

Ear saver included

Individual packaging including:

  • Ziplock to store the mask while not in use
  • Time tracker
  • Name tag
  • Ventilation for correct storage

Formats

10 uds box

Quantity: 10 units (individual bags)/box
SKU: MASK-ST-00024.0010
EAN: 8436592290352
Dimensions: 131 x 210 x 60 mm

Individual bag

Quantity: 1 unit/bag
SKU: MASK-ST-00024.0001
EAN: 8436592290369
Dimensions: 205 x 130 mm

Where to buy

FFP3 Star care masks are exclusively sold through our trusted channels.

If you are a pharmacy, distributor or company, contact us.

Have you bought a product outside of our trusted channels? It may not be an official Star Care product.

Find out >

Fitting instructions

Star Care mascarilla FFP2 paso1

Step 1

Attach one of the mask straps to the ear saver as shown in the image.

Star Care mascarilla FFP2 paso2

Step 2

Hold the mask with one hand and place it on the face, fully covering the nose and mouth. The nose clip should be over the nose.

Star Care mascarilla FFP2 paso3

Step 3

Pull the strap with the ear saver and tie both sides behind the head. Adjust the nose clip to the nose and make sure the edges of the mask are in direct contact with the face.

Star Care mascarilla FFP2 paso4

Step 4

Fit testing for leaks. Allows you to check that the mask is fitted correctly. To do this, cover the mask with both hands and exhale with force. If any leaks are detected at the edges, you will need to adjust the position of the mask against the face, readjust the nose clip and/or the tensile position of the elastic straps using the ear saver. Repeat this process until no leaks are detected.

Other products

FFP2 XS

FFP2 mask XS

Star Care gel hidroalcohólico

Hydroalcoholic gel 

FFP2 Star Care

FFP3 mask

The published images are merely illustrative and may differ slightly from the final product. Some product features may vary depending on the version available at the point of sale.

× How can I help you? Available on SundayMondayTuesdayWednesdayThursdayFridaySaturday