FFP2 mask

Black edition

> 98% filtration of particulate aerosols


Graphene FREE

FFP2 Star Care

5 protective layers

The FFP2 Star Care mask is composed of 5 hydrophobic layers that ensure a filtration of more than 98% against particulate aerosols. 

The layered structure is designed so that Non-woven layers protect the inner layers from the humidity of the environment and other external agents as well as the mist generated by the user.

FFP2 Star Care


 25 g/m2


 25 g/m2


 30 g/m2


 30 g/m2


 25 g/m2

Smart filtration by electret

FFP2 masks do not work exactly like a strainer but rather like a spider web, as the particles get stuck in the fibers that make up the mask.

We can group the particles in three sizes:

Larger than 0.3 ?m

Large particles like droplets of saliva, some bacteria, et

Between 0.3 ?m and 0.1 ?m

We call them aerosols where viruses travel attached.

Smaller than 0.1 ?m

Viruses and other nanoparticles.

Larger than 0.3 ?m


Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.


Star Care FFP2 despiece

Larger than 0.3 ?m 

Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.


Smaller than 0.1 ?m

Those smaller than 0.1 μm are so small that when in contact with air they bounce moving in a random zig-zag pattern called Brownian. This movement makes it very likely that the particle collides with a fiber and sticks.

Star Care FFP2 despiece

Between 0.3 ?m and 0,1 ?m


Particles of about 0.3 μm (aerosols) are the most difficult to filter as they flow with the air, allowing the layers of the mask to be avoided. To avoid this, 2 of the layers of Star Care’s FFP2 masks are electrified, converting the fibers into electrets (the electrical equivalent of a magnet), being able to capture 10 times more particles than normal fibers. 


Star Care FFP2 despiece

High breathability

Star Care masks stand out for their high breathability. Its design means that the mask does not stick to the face, providing a greater volume of air and therefore better breathability.  

In addition, the selected materials offer a low resistance to breathability as can be seen in the graph where all batches are well below the limit established by European regulations.

Ergonomic shape, perfect fit

The FFP2 Star Care mask is designed with every detail in mind. They have great resistance, more than 25 Newtons (2.5 times higher than other masks), and they are welded with double union to the body of the mask

Thanks to the size regulators, you can adjust the mask perfectly to the size of your head, reducing air leaks from the inside to the outside and vice versa.

Additionally, you can also place it with a grip on the neck thanks to the ear guard that each unit includes.

The flat shape of its rubbers and its elasticity make its use extremely comfortable even after a long time.


Each Star Care mask is individually packaged in a ziplock bag made up mostly of cellulosic material (kraft type). Once the mask has been used, it can be stored in the bag again which, with its holes, facilitates the hygiene and integrity of the product.

In addition, thanks to the time tracker and the name tag, you will always have control of the time you have used the mask.


Ventilation for correct storage

Time tracker

Name tag

FFP2 for medical use

The FFP2 masks, like the FFP3, are legally considered PPE (Personal Protective Equipment) and their process to obtain the CE marking is carried out through tests according to the EN 149 standard and by a Notified Body. As it is not governed by the European Directive on Medical Devices, it is mandatory to include the term “Non medical use” in the product packaging.

It doesn’t mean that Star Care masks are not suitable for medical use, since our FFP2 masks have passed the tests provided for by the EN 14683 standard for type IIR surgical masks, so it can be considered both a medical device and a PPE, with its dual functionality.

Anti-fake system

To guarantee that you are buying an original Star Care product, look for the Original Product sticker that includes a QR that allows access to the specific data of the Quality Control performed on the mask and that certifies the originality of the product. It also includes a holographic seal that ensures the inviolability of the box once it has left the production line until it reaches the end user.

How to put on the mask

The habit of fitting the mask properly and in the correct order ensures its effectiveness. Follow these steps and get out of doubt.

Star Care mascarilla FFP2 paso1

Step 1

Attach the size regulators to the mask straps as shown in the picture.

Star Care mascarilla FFP2 paso2

Step 2

Hold the mask with one hand and place it on the face, fully covering the nose and mouth. The nose clip should be over the nose.

Star Care mascarilla FFP2 paso3

Step 3

Pull the straps and place them behind the ears. Adjust with the size regulators for a better fit. Adjust the nose clip to the nose and make sure the edges of the mask are in direct contact with the face.

Star Care mascarilla FFP2 paso4

Step 5

Fit testing for leaks. Allows you to check that the mask is fitted correctly. To do this, cover the mask with both hands and exhale with force. If any leaks are detected at the edges, you will need to adjust the position of the mask against the face, readjust the nose clip and/or the tensile position of the elastic straps using the size regulators. Repeat this process until no leaks are detected.

See more videos >

Technical information

Product name: Filtering  half mask

Classification: FFP2 NR

Model: MSH

Size: 157 mm x 107 mm

Executive standard: EN 149:2001 + A1:2009

Composition: 66.7% Non-woven cloth and 33.3% melt-blown cloth

Conditions for storage: Indoor storage with less than 80% humidity, free from corrosive gases and well ventilated. Keep it away from heat

Allergy warningNon-woven textile

Expiration time: Two years if stored under the specified conditions

Designed for face perfect fit

High breathability

Doble welding that guarantees the resistance of the cords (> 25 Newtons)

With cord stoppers for size regulation

Ear saver included

Individual packaging including:

  • Ziplock to store the mask while not in use
  • Time tracker
  • Name tag
  • Ventilation for correct storage


10 units box

Quantity: 10 units (individual bags)/box
SKU: MASK-ST-00033.0010
EAN: 8436592290642
Dimensions: 131 x 210 x 45 mm


Individual bag

Quantity: 1 unit/bag
SKU: MASK-ST-00033.0001
EAN: 8436592290635
Dimensions: 130 x 205 mm

Where to buy

FFP2 Star care masks are exclusively sold through our trusted channels.


If you are a pharmacy, distributor or company, contact us.

Have you bought a product outside of our trusted channels? It may not be an official Star Care product.

Find out >

Other products


FFP2 mask XS

Star Care gel hidroalcohólico

Hydroalcoholic gel 

FFP3 Star Care

FFP3 mask

The published images are merely illustrative and may differ slightly from the final product. Some product features may vary depending on the version available at the point of sale.

× ¿Cómo puedo ayudarte? Available on SundayMondayTuesdayWednesdayThursdayFridaySaturday