FFP2 XS Mask
Filtering half mask Non reusable
Size: XS
> 99% filtration of particulate aerosols
Classification: FFP2 NR
Executive standard: EN 149:2001 + A1:2009
Duration: 8 hours
Neck adjustment and size regulator for perfect fit and maximum comfort
Ziplock to store the mask while not in use
Returns on masks are not allowed except by factory default
Free shipping from 99 €
Express delivery 24 / 48h
5 protective layers
The FFP2 XS Star Care mask is composed of 5 hydrophobic layers that ensure a filtration of more than 99% against particulate aerosols.
The layered structure is designed so that Non-woven layers protect the inner layers from the humidity of the environment and other external agents as well as the mist generated by the user.
Non-woven
25 g/m2
Non-woven
25 g/m2
Melt-blown
≃ 30 g/m2
Melt-blown
≃ 30 g/m2
Non-woven
25 g/m2
Smart filtration by electret
FFP2 masks do not work exactly like a strainer but rather like a spider web, as the particles get stuck in the fibers that make up the mask.
We can group the particles in three sizes:
Larger than 0.3 𝝻m
Large particles like droplets of saliva, some bacteria, etc.
Between 0.3 𝝻m and 0.1 𝝻m
We call them aerosols where viruses travel attached.
Smaller than 0.1 𝝻m
Viruses and other nanoparticles.
Larger than 0.3 𝝻m
Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.
Larger than 0.3 𝝻m
Particles larger than 0.3 μm, traveling in a straight line, easily collide with one of the fibers and get trapped in it.
Smaller than 0.1 𝝻m
Those smaller than 0.1 μm are so small that when in contact with air they bounce moving in a random zig-zag pattern called Brownian. This movement makes it very likely that the particle collides with a fiber and sticks.
Between 0.3 𝝻m and 0.1 𝝻m
Particles of about 0.3 μm (aerosols) are the most difficult to filter as they flow with the air, allowing the layers of the mask to be avoided. To avoid this, 2 of the layers of Star Care’s FFP2 masks are electrified, converting the fibers into electrets (the electrical equivalent of a magnet), being able to capture 10 times more particles than normal fibers.
High breathability
Star Care masks stand out for their high breathability. Its design means that the mask does not stick to the face, providing a greater volume of air and therefore better breathability.
In addition, the selected materials offer a low resistance to breathability, allowing to achieve much better results than those required by European regulations.
Ergonomic shape, perfect fit
The FFP2 Star Care mask is designed for the little ones. Ajuste en nuca para un mayor confort y una gran resistencia, más de 25 Newtons (2,5 veces superior a otras mascarillas) además de tiras soldadas con unión doble al cuerpo de la mascarilla.
Thanks to the size regulator, you can adjust the mask perfectly to the size of the head, reducing air leaks from inside to outside and viceversa.
And the neck adjustment provides maximum comfort for long periods of use.
How to put on the mask
The habit of fitting the mask properly and in the correct order ensures its effectiveness. Follow these steps and get out of doubt.
Step 1
Attach the size regulators to the mask straps as shown in the picture.
Step 2
Hold the mask with one hand and place it on the face, fully covering the nose and mouth. The nose clip must be over the nose.
Step 3
Place the lower strap behind your head. Next, pass the top strap over your head until it is at the crown of your head.
Step 4
Adjust the size of the straps with the size regulatores for a better fit. Fasten the nose clip to the nose with both hands and make sure the edges of the mask are in direct contact with the face.
Step 5
Fit testing for leaks. Allows you to check that the mask is fitted correctly. To do this, cover the mask with both hands and exhale with force. If any leaks are detected at the edges, you will need to adjust the position of the mask against the face, readjust the nose clip and/or the tensile position of the elastic straps using the size regulators. Repeat this process until no leaks are detected.
Packaging
Each Star Care mask is individually packaged in a ziplockbag made upmostly of cellulosic material (kraft type).Once the mask has been used, it can be stored in the bag again which, with its holes, facilitates the hygiene and integrity of the product.
In addition, thanks tothe time tracker and the name tag, you will always have control of the time you have used the mask.
Ziplock
Ventilation for correct storage
Time tracker
Name tag
Anti-fake system
To guarantee that you are buying an Original Star Care product, look for the Original Product sticker that includes a QR that allows access to the specific data of the Quality Control performed on the mask and that certifies the originality of the product. It also includes a holographic seal that ensures the inviolability of the box once it has left the production line until it reaches the end user.
Have you bought a product outside of our trusted channels? It may not be an official Star Care product.
Find out >
Technical sheet
Product name: Filtering half mask
Classification:FFP2 NR
Model: STC-F2-01
Size: 138 x 97 mm. Size XS
Standard: EN 149:2001 + A1:2009
Composition: 66.7% non woven fabric, 33.3% meltblown non woven fabric
Storage conditions: Indoor storage with less than 80% humidity, free from corrosive gases and well ventilated. Keep away from heat sources.
Allergy warning:Non woven textile
Expiration time: Two years if stored under the specified conditions
Design that fits the face perfectly
High breathability
Doble weldingthat guarantees the resistance of the cords (>25 Newtons)
With cord stoppers for size regulation
Ear saverincluded
Individual packaging including:
- Ziplock to store the mask while not in use
- Time tracker
- Ventilation for correct storage
Formats
10 units box
Quantity: 10 units (individual bags)/box
SKU: MASK-ST-00031.0010
EAN: 8436592290505
Dimensions:131 x 210 x 45 mm
Individual bag
Quantity: 1 unit/bag
SKU: MASK-ST-00031.0001
EAN: 8436592290499
Dimensions: 130 x 205 mm
If you are a pharmacy, distributor or company, contact us
Other products
FFP2 mask
Hydroalcoholic gel
FFP3 hald mask
The published images are merely illustrative and may differ slightly from the final product. Some product features may vary depending on the version available at the point of sale.
